- Developed to simplify the control of LED pixel dots and strips
- Converts up to 8,192 channels (2,730 RGB pixels) via its 8 PLink outputs (2 universes per port) with perfect synchronisation
- Acts as the centre of the PLink control system from ENTTEC
- Converts eDMX (e.g. Art-Net, sACN and ESP) to SPI in the PLINK system for pixel control over long distances
- 1 x RJ45 Ethernet input (10/100 Mbit/s) to 8 x RJ45 output ports, each enabling PLINK data output via Cat5e/Cat6 cable
- Up to 32 universes (4 U per port) Pixel control in overdrive mode
- Active IEEE 802.3AF Active PoE or 12-24 V DC power input
- All ports have ESD surge protection and resettable fuses to block external faults and the spread of electrical noise through the control network
- Compatible with the ENTTEC PLINK INJECTOR series
- Compatible with the automatically addressable RGBW LED dimmer ENTTEC CVC4
- The pixel arrangement including pixel sequence and pixel grouping for each PLINK output can be configured individually
- Scope of delivery: Pixelator Mini, 1 x 2 m CAT5 cable, 1 x 12 V power supply adapter with international plugs, rack mounting bracket, surface/DIN mounting bracket, DIN clip and screws
- Connections: 8 x PLINK output (RJ45)
- 1 x Power input (DC)
- 1 x Ethernet (RJ45)
- ESD protection: resettable fuse and TVS suppression per port
- Surge protection: Yes (all ports)
- IP rating: IP20
- Input protocols: Art.Net, sACN, ESP
- Output protocol: SPI in the PLINK system
- max. output universes: 32
- Network speed: 10/100Base-T
- Network configuration: Static / DHCP
- Configuration and update: Web interface
- Input voltage: 12-24 V DC/PoE IEEE802.3AF
- Max. power consumption: 8 W
- Cooling method: Convection
- Operating temperature: -20°C to +50°C
- Housing material: ABS + anodised aluminium
- Dimensions: 390 x 210 x 110 mm
- Weight: 0.79 g
$769.00 - Voir plus - Acheter en ligne