The Transient Designer provides a revolutionary concept for dynamic processing rendering controls such as Threshold, Ratio and Gain superfluous. The Transient Designer provides a very elaborated automation, so while the processing going on inside the box may be very complex, the user has to deal with just a pair of intuitive controls. How does it work? The Transient Designer uses envelope followers to track the curve of the natural signal so that optimum results are guaranteed regardless of the input signal's dynamics. Because of the level-independent processing inherent in Differential Envelope Technology (DET), manual threshold adjustments are not required. Sound benefits - The attack of a bass drum or a loop can be emphasised with a single control to increase the punch and the penetration in the mix - Sustain of a snare or room-sound can be shortened very musically to clean up the mix for more transparency - Acoustic or electronic instruments become in the face sounds or can be smoothened with lower attacks - De-verb capability! Less Sustain shortens reverb flags of any sound (more elegant than gates do) - New panorama effects based on different dynamic effects per channel ? try this with loops for example Other features For stereo operation the Link function connects channel pairs (1 and 2 and/or 3 and 4). Linked channels are controlled by the same side-chain voltage so as to maintain a coherent and stable stereo image. When operating in Link-mode, the control elements of the first (or third) channel, including the Active switch, control the second (or fourth) channel, too. Each channel is equipped with a relay hard bypass circuit to ensure a minimum signal path when the process is bypassed and to provide power fail safety. The Signal-LEDs allow to quickly monitor the signal flow, which is particularly important if the four channels are connected to a patchbay. The Transient Designer is fitted with XLR-connectors for balanced operation. To improve signal quality, SPL has developed a new hybrid-component balanced input/output stage using all laser-trimmed resistors with a tolerance of 0.01%. This approach has resulted in an exceptionally high CCMR (common mode rejection) better than -80dB at 1kHz.
EUR 1099.00 - See more - Buy online
Version française
(EUROPEAN COMPANY) 
