d:dicate? ST4006A Stereo Pair with 4006A Omnis - carefully matched microphones - high sensitivity, low noise-floor and extremely linear frequency - PeliTM case transportation and protection The DPA ST4006A is a complete DPA 4006A Stereo Pair with two carefully factory-matched omni microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer. The specially selected DPA 4006A microphones are matched within ±0.5 dB on both frequency response and sensitivity. The maximum phase response difference is 5°. The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphone pair makes the ST4006A the perfect choice for all AB Stereo recordings. The design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory foam inlays. Included in this kit - 2 x 4006A Omni Microphone - 2 x DD0251 Free-Field Grid, Silver - 2 x DD0254 Close-Miking Grid, Trapezoid, Silver - 2 x DD0297 Diffuse-Field Grid, Black - 2 x UA0639 Microphone Clip - 2 x DUA0020 Foam Windscreen for 2006A/2011A/4006A/4011A/4015A Specifications - Directional pattern: Omnidirectional - Principle of operation: Pressure - Cartridge type: Pre-polarized condenser - Frequency range: 10 Hz - 20 kHz - Frequency range, ± 2 dB: 10 Hz - 20 kHz - Sensitivity, nominal, ± 2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa - Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)) - Equivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB) - S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A) - Total Harmonic Distortion (THD): 60 dB - Power supply (for full specifications): 48 V Phantom power (± 4 V) - Current consumption: 2.8 mA - Connector: XLR-3M. Pin 1: shield, Pin 2: signal phase, Pin 3: - phase - Color: Matte black - Weight: 163 g (5.7 oz) - Microphone diameter: 16 - 19 mm (0.6 - 0.75 in) - Capsule diameter: 16 mm (0.6 in) - Microphone length: 170 mm (6.7 in) - Output voltage, RMS: > 5 V - Polarity: V at pin 2 for positive sound pressure - Temperature range: -40 °C to 50 °C (-40 °F to 122 °F) - Relative Humidity (RH): Up to 90% - Classification: Conforms to IEC 61672 Class I (with Near-field Grid DD0251) - Matching tolerance: ± 0.5 dB - Phase deviation for kit: < 5°
EUR 4698.00 - See more - Buy online
Version française
(EUROPEAN COMPANY) 
