The Cameo CLSB6D is a professional solution for DMX network configuration. This splitter/booster in 19 format amplifies the DMX input signal and sends it to 6 galvanically isolated outputs. It connects directly to the DMX console or DMX controller. The input and THRU connectors for signal forwarding are available on the front and rear panel of the CLSB6D; they are dubbed and wired in parallel. Illuminated LEDs on the front panel indicate the DMX and Power status of the channels; the outputs are grouped on the rear panel. A 120 ohm terminating resistor is switchable on the DMX THRU output; the unit has its own mains switch and comes with IEC cable. To mount the unit upside down and provide better access to the connectors, the rack ears can be attached to the rear of the chassis. Professional 6-channel DMX splitter/booster DMX professional Rackable 19 1 U 6 galvanically isolated outputs on 3-pin/5-pin XLR connectors DMX status indicator per channel Power indicator 120 ohm termination resistor on DMX THRU output connector Possibility of racking, front panel or rear panel visible SPÉCIFICATIONS Product type Lighting accessories - miscellaneous Type Splitter/Booster DMX DMX 2 inputs (in parallel) DMX input connectors 3-pin male XLR connector, 5-pin male XLR connector Number of DMX Thru 2 Referrals (in parallel) DMX Thru Routing Connectors 3-pin female XLR connector, 5-pin female XLR connector DMX outputs 6 DMX output connectors 3-pin male XLR connector, 5-pin male XLR connector Power On/Off settings, DMX Thru Terminator DMX switch Indicators 6 x Power LED, 6 x LEDs Signal IEC mains connector Mains voltage Transformer Mains voltage 230 V AC, 50 Hz Power consumption 15 W Width 483 mm Height (mm) 44 mm Depth 160 mm Weight 3 kg Accessories (included) Power cable
EUR 159.00 - See more - Buy online
Version française
(EUROPEAN COMPANY) 
